LaserLinc's Triton line of three-axis micrometers provide more precise tracking of average diameter than two-axis micrometers, near-perfect ovality measurement, and improved flaw detection on opaque and clear products.
The latest addition to the Tritons, the high-speed Triton360, is capable of up to 12,000 measurements per second and a measurement range up to 2"/51mm.
The Triton360 micrometer is ideal for:
- Ovality & Eccentricity;
- Outside Diameter;
- Glass & Transparent material;
- Flaw Detection;
- Pipe, tube, cable, hose, and many other materials.
How much more accurate is a three-axis micrometer? The degree of improvement over a two-axis micrometer depends on how out of round the product is. The standard deviation of the diameter measurements from a three-axis micrometer can be as much as 100 times better than the reported average diameters from a two-axis micrometer.
Triton360 Specifications
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
4800 standard/12000 optional (1600/4000 measurements per second per axis)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
±.0002˝ (±5.08µm)
within center 2˝ (51mm)
|
|
|
Approx.
Dimensions
(H x W X D)
|
21"H x 21"W x 2"D/
(533mm x 533mm x 51mm)
|
|
|
|
|
|
|
|
Power requirements from PC
|
None; power is received from AC cord plugged into 110-220VAC 50-60Hz 2-phase electric.
|
|
|
Run up to four Triton360 micrometers from one card and as many as 16 from one PC using four cards.
|
*Repeatability applies within the measurement range.
|
|
With a Triton360 from LaserLinc, you will never look at diameter measurement and control the same way again.
LaserLinc Triton brochure (including Triton312, Triton330, and Triton360).
Eliminate errors due to product orientation!