TLAser260 micrometers

The TLAser260™ micrometer can continuously measure product diameters between .016 and 2 inches and product position in two planes at right angles to each other. A maximum gauging rate of up to 8,000 measurements per second (4,000 per second per axis) enables the TLAser260 to precisely check diameter and ovality while also detecting lumps and neck-downs to assure the most thorough quality inspection possible.

Incorporating a mirror-based design, the rugged TLAser260 features a heavy aluminum body with steel covers sealed for lasting performance in harsh industrial environments. An optional air purge mounts easily to the gauge.

The TLAser260, like all LaserLinc micrometers, is designed to serve only one purpose—measure the product's dimensions and route them to a PC. The TLAser230 micrometer operates with the popular TLAser400™ interface card and related software to control product quality more economically and effectively by capitalizing on the enormous processing power and flexibility of today's PCs.

4-axis measurement with two TLAser260 micrometers mounted at a 45-degree offset.

Two TLAser260 units mounted at a 45-degree offset to provide 4-axis measurement data.

For LaserLinc’s other dual-axis micrometers, please visit these pages.

TLAser203

TLAser222

TLAser230

TLAser2120

Brochures and Mechanical Drawings

LaserLinc dual-axis micrometer brochure (including TLAser230, TLAser260, and TLAser2120).

TLAser260 Micrometer Specifications


Measurement Range	0.016˝ – 2˝ (0.4mm – 51mm)

Maximum Measurement Size	2.36˝ (60mm)

Measurements per second	3,200 (1,600 per axis) standard / 8,000 (4,000 per axis) optional

Resolution	.000001˝ (.025µm)

Repeatability*
Single Scan	±0.004˝ (±0.102mm)

Two Second	±0.00002˝ (±.5µm)

Positional Error	±0.0002˝ (±5µm) within center 2" (51mm)

Approx. Dimensions (H x W x D)	19˝ x 18˝ x 3˝ (478mm x 447mm x 76mm)

Approx. Weight	38 lbs (17.2kg)

Power requirements from PC	+12VDC 200mA, +5VDC 150mA, -5VDC 150mA

Part aperture is 5˝ x 6˝ (without air purge). Run up to four TLAser260 micrometers per PC. Laser Class II visible red laser diode wavelength is 675nm.

*Repeatability applies within the measurement range.

TLAser260, two-axis scanning with a 60mm window.

Add a TLAser260 to your line!

LaserLinc, Inc.
NEW ADDRESS: 777 Zapata Dr, Fairborn OH 45324
Phone: +1.937.318.2440 | Toll-Free: +1.888.707.4852 | Fax: +1.937.318.2445 | contact LaserLinc