Search the
LaserLinc
web site

Scanners
Single-Axis
Single-Axis, Split
Transmitter-
Receiver
Dual-Axis
Triple-Axis
Ultrasonics
Cards
Software
Applications
           
 
 

You can readily inspect and reduce the product variations of large pipe, hose, and tubes up to 120mm (4.72 inches) in diameter with LaserLinc's TLAser2120™ dual-axis micrometer.

The TLAser2120 micrometer can continuously measure product diameters and product position in two planes at right angles to each other. A maximum gauging rate of 8,000 measurements per second enables the TLAser2120 to check diameter and ovality while also detecting lumps and neck-downs, to assure the most thorough quality inspection possible.

Incorporating a mirror-based design, the rugged TLAser2120 features a heavy aluminum body with sealed metal covers for lasting performance in harsh industrial environments. An optional air purge mounts easily to the gauge.

The TLAser2120, like all LaserLinc micrometers, is designed to serve only one purpose—measure the product's dimensions and route them to a PC. The TLAser2120 micrometer operates with the popular TLAser400™ interface card and related software to control product quality more economically and effectively by capitalizing on the enormous processing power and flexibility of today's PCs.


Hi-speed, rugged, dual-axis scanners from LaserLinc.

Hi-speed, rugged, dual-axis scanners from LaserLinc.

 

   

Brochures and Mechanical Drawings

LaserLinc dual-axis micrometer brochure (including TLAser230, TLAser260, and TLAser2120).

A 3D pdf showing the TLAser2120.


TLAser2120 Micrometer Specifications
Measurement
Range
0.028˝ – 4˝
(0.7mm – 102mm)
Maximum
Measurement Size
4.72˝
(120mm)
Measurements
per second
3,200 (1,600 per axis) standard /
8,000 (4,000 per axis) optional
Resolution
.000001˝ (.025µm)
Repeatability*
Single Scan
±0.008˝ (±0.203mm)
Two Second
±0.00004˝ (±1.0µm)
Positional
Error
±0.0004˝ (±10µm)
within center 4" (101.6mm)
Approx.
Dimensions
(H x W x D)

22˝ x 20.25˝ x 3˝
(561mm x 514mm x 76mm)
Approx.
Weight
53 lbs
(24kg)
Power
requirements
from PC

+12VDC 200mA, +5VDC 150mA,
-5VDC 150mA
Part aperture is 8" x 10" (without air purge).
Run up to four TLAser2120 micrometers per PC.
Laser Class II visible red laser diode wavelength is 675nm.
*Repeatability applies within the measurement range.

For LaserLinc’s other dual-axis micrometers, please visit these pages.
 
LaserLinc, Inc.
NEW ADDRESS: 777 Zapata Dr, Fairborn OH 45324
Phone: +1.937.318.2440 | Toll-Free: +1.888.707.4852 | Fax: +1.937.318.2445 | contact LaserLinc
Specifications & dimensions subject to change.
Contents ©2001-2008 LaserLinc, Inc. | All rights reserved