TLAser122s micrometer

TLAser122s micrometer specifications
Measurement Range	.003˝ – .85˝ (.075mm – 22mm)

Maximum Measurement Size	.85˝ (22mm)

Measurements Per Second	400

Resolution	.000001˝ (.025µm)

Repeatability*
Single Scan*	±.0001˝ (±.2.5µm)

Two Second*	±.000005˝ (±.125µm)

Positional Error	±.0001˝ (±2.54µm) within center .79˝ (20.32mm)

Approx. Dimensions	(H x W x D)
Transmitter	4.2˝ x 5.3˝ x 1.25˝ (107mm x 135mm x 32mm)

Receiver	4˝ x 3˝ x 1.25˝ (102mm x 77mm x 32mm)

Approx. Weight	2.5 lbs (1.1kg)

Power requirements from PC	+12VDC 125mA, +5VDC 100mA, –5VDC 75mA

Run up to four TLAser122s micrometers from one card and as many as 16 from one PC using four cards. Laser Class II visible red laser diode wavelength is 675nm. *Repeatability applies within the measurement range.

Except for its two-part housing, the single-axis TLAser122s™ micrometer is identical to the standard TLAser122™. Separating the transmitter and receiver in their own respective units enables you to mount them further apart to scan larger products and multiple assemblies.

One of the leading applications for the TLAser122s is multi-strand measurement. A large array of strands would be obstructed by the connecting base of the standard TLAser122 design.

Measuring large products is another frequent application for the TLAser122s, because the transmitter and receiver can be mounted farther apart; in additon, mounting farther apart enables safer measurement of extremely hot products.

Both the TLAser122 and TLAser122s models can be connected to a PC by means of the TLAser400 micrometer interface card to achieve unparalleled processing power and flexibility at relatively low cost. The TLAser400 card enables your PC to process data at the full measurement rate from as many as 16 laser micrometers.

Brochures and
Mechanical Drawings

TLAserX22 brochure (including TLAser122, TLAser122s, and TLAser222).

A pdf of the mounting dimensions of the TLAser122s describing hole and field locations.

A 3D e-drawing of the mounting dimensions of the TLAser122s describing hole and field locations.

LaserLinc, Inc.
777 Zapata Dr, Fairborn OH 45324
Phone: +1.937.318.2440 | Toll-Free: +1.888.707.4852 | Fax: +1.937.318.2445 | Contact LaserLinc

TLAser122s micrometer specifications

Brochures and Mechanical Drawings

Brochures and
Mechanical Drawings