|
 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 The ProfileVu is a micrometer fixture that oscillates up to 180 degrees to allow continuous inspection. This fixture is ideal for use in finding width and thickness of non-circular products, such as flat wire, and for locating thick and thin sections of extruded material and other die-formed products. Users can mount one or two LaserLinc laser micrometers to the ProfileVu. Compatible models are the TLAser122, TLAser222, TLAser230, Triton312, and Triton330. Using three-axis micrometers (providing six-axes of inspection), the angle of rotation and the cycle-time required to identify the dimensions of interest are significantly reduced. The fixture’s angle of rotation is adjustable from four up to 180 degrees, and it completes a rotation of 180 degrees in four seconds (speed and rotation are dependent on the material to be inspected). The angle of rotation is managed by an easy-to-configure PLC. Combined with a Quadrature encoder, the ProfileVu system can correlate diameter (or other laser scanner measurement) with the angle of measurement, giving an accurate picture of the product.
Two LaserLinc three-axis Triton micrometers mounted to the ProfileVu.
Power requirements for the ProfileVu are 110 - 240 VAC, 50 - 60 Hz; the unit comes with a one year warranty. The Zero Latency encoder input is part of Total Vu software. |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
LaserLinc, Inc. 777 Zapata Dr, Fairborn OH 45324 Phone: +1.937.318.2440 | Toll-Free: +1.888.707.4852 | Fax: +1.937.318.2445 | Contact LaserLinc |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Specifications & dimensions subject to change. | Contents ©2001-2010 LaserLinc, Inc. | All rights reserved
|
