The TLAser260 Micrometer can continuously measure product diameters between .016 and 2 inches and product position in two planes at right angles to each other. A maximum gauging rate of up to 8,000 measurements per second (4,000 per second per axis) enables the TLAser260 micrometer to precisely check diameter and ovality while also detecting lumps and neck-downs to assure the most thorough quality inspection possible.

Incorporating a mirror-based design, the rugged TLAser260 Micrometer features a heavy aluminum body with steel covers sealed for lasting performance in harsh industrial environments. An optional air purge mounts easily to the gauge.

The TLAser260, like all LaserLinc micrometers, is designed to serve only one purpose -- to precisely measure the product's dimensions and route them to a PC. The TLAser260 micrometer operates with the popular TLAser400 Interface Card and related software to more economically and effectively control product quality by capitalizing on the enormous processing power and flexibility of today's PC.

LaserLinc Dual-Axis Micrometer Brochure
Download (PDF 510K)

TLAser260 Micrometer Specifications
•	Measurement range is .016" - 2" (.4mm - 51mm)
•	Resolution is .000001" (.025µm)
•	Two-second measurement repeatability is ±.00002" (±.5µm)
•	Positional error ±.0002" (±5µm) within center 2" (51mm)
•	Measurement rates up to 4,000 (options for 1,000; 2,000 and 4,000) measurements per second per axis
•	Weight is 38 lbs (17.2kg)
•	Dimensions are 17.6"L x 3"W x 18.8"H
•	Part aperture is 5" x 6" (without air purge)
•	TLAser400 supports up to four TLAser260 micrometers per card
•	Laser Class II visible red laser diode wavelength is 675 nm

Above, the TLAser260 provides precision and performance in almost any production setting.

At left, two TLAser260 units mounted at a 45-degree offset to provide 4-axis measurement data.